What are 101A wheels good for?

Table of Contents

What are 101A wheels good for?

What are 101A wheels good for?

They offer a balance between grip and speed, making them a beginner's choice for both street skateboarding and for smooth surfaces like skate parks and ramps. 101a plus are professional wheels. They are the fastest and hardest with the least grip and are used only on smooth surfaces.

Can you cruise with 101A wheels?

Cruising wheels are usually around 78A, but can be anywhere between 78A and 90A. etc. NOTE TO BEGINNERS: It is smart to stick with something around 101A. ... For a good cruising wheel, choose something between 78A and 90A.

What skate wheels are hard?

Skateboard wheels are made from polyurethane (PU) and their hardness is measured in durometer. Most range between 75a to 104a. Any wheel in the 78a to 90a range is considered a soft wheel, 90a to 98a is in the middle, 99a+ is referred to as a hard wheel.

Are 99a wheels soft?

These wheels have a hardness (durometer) of 99a, making them incredibly hard, solid wheels. This is the most common durometer found in skateboard wheels used for shortboards.

Is there a big difference between 99a and 101a?

It's a hardness that provides great grip on most street surfaces while retaining speed, pop and a smooth ride. Being slightly softer than the harder 101a, the 99a is slightly more forgiving on impact. 101a duro is more suited to smoother transitional skateparks and ramps.

Does primitive have good wheels?

0:005:52Primitive Skateboards Wheel Review - YouTubeYouTube

Is 101a too hard for street skating?

For example 101A would be a very hard skateboard wheel, while 75A would be a very soft one. ... Image of a wheel with size and durometer printed on it. Almost all street and transition wheels are harder than 98A. Cruising wheels are usually around 78A, but can be anywhere between 78A and 90A.

Are 92a wheels soft?

These skateboard wheels have a softer urethane formula that rolls best over rougher terrain like craggy streets, ditches or pools. ...

Are 54mm wheels good?

54mm is probably the best all rounder if you are looking at skating a big variety of terrain. This size seems to provide most skateboarders with the perfect blend of speed and acceleration. This really is the Goldilocks zone of wheel size choice.

Are Harder wheels better for sliding?

While harder wheels with a higher durometer are typically better choices for easy sliding, they aren't always the best choice. Some wheels can actually be too hard, making your slides extra slippery and challenging to control — especially at high speeds or when you're downhill longboarding.

Which is harder 100A or B skateboard wheels?

  • As stated above, some skate companies saw a need for wheels that are even harder than 100A, so they created the Durometer B Scale. Durometer B Scale wheels are extremely hard, so the B rating scale starts where the A scale stops. The conversion from the A to B Durometer Scale is as follows:

How is the hardness of a skateboard wheel measured?

  • Other manufacturers use the Durometer B Scale, which measures 20 points below the Durometer A Scale. As a result, it allows for an additional 20 points for the hardest wheels. In skateboarding, and according to the Durometer A Scale, the wheel's hardness is measured in durometers and ranges from 75A (softest) to 101A (hardest).

How big of a skateboard wheel do I Need?

  • Depending on the size of your local mini ramp, it sometimes is a good idea to go with a slightly larger diameter like 56mm. You’re also fine picking wheels with a diameter of 54mm but it requires you to pump harder.

Related Posts: